Frequently Asked Questions

To use the FAQ page, click on the desired question to go to its description.

1. What is WindShield?
2. What is the process?
3. How much does it cost?
4. How long does it last?
5. Can I do it myself?
6. What are the benefits and advantages?
7. How long does it take?
8. I have my WindShield panels in storage. Can I hire WindShield to re-install them prior to a storm?
9. Does WindShield have the "rubber stamp" of approval from Dade County?


1. What is Windshield?

WindShield Systems is a revolutionary new system for protecting windows and doors from damage caused by flying debris during a storm.

The system consists of three (3) basic components: The rigid ultra-light sheeting serves as the panel that stops or deflects flying debris. Positive mechanical fasteners attach the panel securely to the window or door opening. The nylon tie-on-base loop makes it simple to remove the panel for storage.

Unlike many other storm protection products, WindShield Systems is a protection system and as such is measured, cut and pre-installed by our professionally trained representatives.

Windshield is not a film. It is a strong rigid lightweight panel capable of stopping or deflecting projectiles before they strike the glass.

Back to Top


2. What is the process?

 Once you have selected the WindShield Systems, a representative will arrange to measure the windows and doors you wish protected.

During the measuring process a small permanent window identification label will be installed on the frame, usually in the lower left corner of the opening.

Your panels will be precision cut to fit and marked in the lower left corner with their corresponding window identification label.

Back to Top

3. How much does it cost?

 The price depends on the size opening and whether it is on the ground or upper floor. We invite you to contact us for a free quote for your particular needs.

Back to Top


4. How long does it last?
Each of the three primary components has been utilized successfully in many other applications and individually would last indefinitely.
Back to Top


5. Can I do it myself?
Yes, although we recommend that one of our trained representative perform the installation.

Back to Top


6. What are the benefits and advantages?
 Back to Top

7. How long does it take?

 Depending on our workload you can expect a WindShield Systems representative to measure your home within a few days of your request. Your panels should be pre-cut and ready for their initial installation within a few weeks of placing your order.

The pre-installation will take two or three hours depending upon the size of your home. In time of need the homeowner should be able to re-install each panel in just a few minutes.

Back to Top

8. I have my WindShield panels in storage. Can I hire WindShield to re-install them prior to a storm?

 If time permits we will be happy to fill your request. Normally this will be scheduled on a first call basis unless we have a prearranged or absentee owner agreement in place. Please call for details.

Back to Top

9. Does WindShield have the "rubber stamp" of approval from Dade County?

The WindShield MD panels have been tested by an independent laboratory as exceeding the Dade County requirements, but they do not carry the official seal. To obtain the seal, the fabrication plant would have to allow yearly inspections. The technology and methods used in fabricating the WindShield systems are proprietary and to prevent the process from being stolen the plant does not allow inspections. We can provide you with test data to present to your local building authorities for approval.

Back to Top